Chicken coop layout

A coop for 6 standard hens is 4 × 5 ft: the roost at the back, nest boxes at or above the roost, and the feeder and waterer on open floor in front.

Hens
6
Bird size

The layout, rule by rule

Tap a rule, or a part of the drawing, to see the other.

Top view of a coop for 6 hens with the layout rules marked

A common mistake is placing the roost where droppings fall into the nests or onto feeders. Sketch the birds’ routes before building, then leave clear access to nests, feeders, and the roost for daily care.

The rules and where they come from

Where sources disagree each figure keeps its own row or note; nothing is averaged. Common practice means no extension service publishes the figure.

RuleFigureSource
Roost from the wallsat least 12″University of Kentucky Cooperative Extension
Gap between roost bars10-12″ clearOregon State University Extension, Penn State Extension
Nest floor against the roostnot lower than the roost, at least 18″Oregon State University Extension, Utah State University Extension
Feeder edge3″ per henPenn State Extension
Water nipples1 per 6 hensPenn State: 1 per 6-8 birds.Penn State Extension
Feeder and waterer out from under the roosta layout choiceCommon practice

Roost clearance and spacing

University of Kentucky recommends setting the roost 12 in from the wall. For bars beside one another, Oregon State Extension gives a 10 in minimum spacing, while Penn State Extension recommends 12 in. Use the wider spacing when you have room, so hens can settle without crowding. Check the finished layout from the birds’ level: a bar should not block access to another bar or leave a hen pressed against the wall.

Choose a roost height

Roost height depends on bird size, and the guidance differs. Penn State Extension gives bantams a range of 12–18 in, while Oregon State Extension puts silkies at 1 ft. For standard and large birds, Oregon State recommends 2 ft; Penn State gives 18–24 in. These are not identical recommendations. Choose a height your flock can reach comfortably, and keep the route clear of nest boxes and other obstacles.

Place nests and feeders

Utah State recommends nest floors at least 18 in above the coop floor. Keep nests easy to reach for egg collection and away from the direct path beneath the roost. Penn State Extension allows 3 in of feeder edge per bird, so make enough feeding space for the flock to eat without pushing. In the six-hen example, a 4 × 5 ft coop contains 20 sq ft, with a 6 × 10 ft run containing 60 sq ft.

Questions

How far should a chicken roost be from the wall?

University of Kentucky recommends 12 in from the wall. Leave enough room for a hen to perch without pressing against it, and keep the roost positioned so droppings do not land in nests or feeders.

How far apart should chicken roost bars be?

Oregon State Extension gives 10 in as the minimum between bars, while Penn State Extension recommends 12 in. If your layout allows, use Penn State’s spacing to give hens more room to settle.

How high should a chicken roost be?

For bantams, Penn State Extension gives 12–18 in, while Oregon State places silkies at 1 ft. For standard and large birds, Oregon State recommends 2 ft, and Penn State gives 18–24 in.

How high should nesting boxes sit?

Utah State recommends setting nest floors at least 18 in above the coop floor. Keep the boxes accessible for egg collection and position them away from the direct path beneath the roost.

Next step

Put the numbers into your own coop in the planner.